Display

The SYNCRO-LINK MARK ZERO Display.

The SYNCRO-LINK has an onboard OLED display that displays useful information.

Page 1

alt title
  • On the top bar
    • UDP will indicate whenever UDP packets are streaming, usually takes 45-60 seconds after boot-up if the network settings are correct
    • Firmware version is shown on the right
  • On the left
    • ip address of SYNCRO-LINK
    • ip address of destination server
    • port on destination server. DHCP will show next to port if network is configured as DHCP
    • mac address of SYNCRO-LINK
  • On the right
    • LTC/Timecode
    • This should appear and change every frame when timecode is present
    • When timecode is no longer connected, the last timecode received will show
    • LTC is limited to 30 frames max, but when operating in double-rate video formats, such as 47.96, 48, 50, 59.94 or 60, SYNCRO-LINK will convert UDP packet timecode at the double rate, but the display will only show actual timecode.
    • SYNC input format
    • Note, for UHD/4K, cameras will typically accept 1080 formats as Tri-Level sync for resolutions above 1080 do not exist.
    • When SYNC is not present or format is not supported, this line will go blank
    • Lens Name
    • This is the name provided by the lens data connection
    • This line will go blank when lens connection is removed
    • Lens Firmware Version
    • This will show the current firmware version as reported by the lens
  • Notes
    • During boot-up, if no SD card is present, or SD card is missing config files or config files are not properly formatted, message will appear on device “SD Card not present”
    • insert card and reboot device

Page 2

alt title
  • On the left
    • Focus distance
    • Lens t-stop. Readings are displayed in common aperture scale, with tenths resolution between marks. So 4-5 would be a T4 to T5.6 split
    • Zoom focal length
    • Entrance pupil. This is a signed number, showing the distance of the entrance pupil from the film plane, with negative numbers being behind the film plane.

Page 3

alt title
  • On the left
    • Lens manufacturer
    • Lens serial number
    • Lens Owner

Page 4

alt title

  • On the left

    • PoE Voltage
    • DC Voltage
    • Streaming Format

  • On the right

    • LTC
    • UTC date & time of day
    • SYNCRO-LINK Firmware version
    • SYNCRO-LINK firmware generation date and time
← Connections
Unreal →